High throughput online sequential extraction of natural rare earth elements and determination by mass spectrometry

At the beginning of rare earth industry,several days are normally required for characterization of rare earth elements(REEs)fractionation in ore samples.Herein,rapid fractionation analysis of 15 REEs and accompanied metal(Fe,Mn,etc.)in ore samples has been achieved within 1 h using ICP-MS with a homemade device for online sequential solvent extraction.As a result,five fractionations for REEs occurrences,i.e.,water soluble,exchangeable,reducible,oxidizable and crystalline,have been identified,offering chemical insights which not only reveal the formation mechanism of REEs ores but also show great implications for guiding the exploitation and separation of REEs.In comparison with conventional methods,the present approach significantly shortened the analysis time(1 h vs.~80 h)and reduced the sample consumption(1.0 mg vs.5.0 g)with high recovery(>95%),providing a useful platform for the rapid quantitative fractionation analysis of REEs in complexed samples such as ore and fossils.     

Key Role of a-Top CO on Terrace Sites of Metallic Pd Clusters for CO Oxidation

Pd-based catalysts are the most widely used for CO oxidation because of their outstanding catalytic activity and thermal stability. However, fundamental understanding of the detailed catalytic processes occurring on Pd-based catalysts under realistic conditions is still lacking. In this study, we investigated CO oxidation on metallic Pd clusters supported on Al₂O₃ and SiO₂. High-angle annular dark-field scanning transmission electron microscopy revealed the formation of similar-sized Pd clusters on Al₂O₃ and SiO₂. In contrast, CO chemisorption analysis indicated a gradual change in the dispersion of Pd (from 0.79 to 0.2) on Pd/Al₂O₃ and a marginal change in the dispersion (from 0.4 to 0.24) on Pd/SiO₂ as the Pd loading increased from 0.27 to 5.5 wt %; these changes were attributed to differences in the metal-support interactions. Diffuse reflectance infrared Fourier-transform spectroscopy revealed that fewer a-top CO species were present in Pd supported on Al₂O₃ than those in Pd supported on SiO₂, which is related to the morphological differences in the metallic Pd clusters on these two supports. Despite the different dispersion profiles and surface characteristics of Pd, O₂ titration demonstrated that linearly bound CO (with an infrared signal at 2090 cm⁻¹) reacted first with oxygen in the case of CO-saturated Pd on Al₂O₃ and SiO₂, which suggests that a-top CO on the terrace site plays an important role in CO oxidation. The experimental observations were corroborated by periodic density functional calculations, which confirmed that CO oxidation on the (111) terrace sites is most plausible, both kinetically and thermodynamically, compared to that on the edge or corner sites. This study will deepen the fundamental understanding of the effect of Pd clusters on CO oxidation under reaction conditions.     

Correction to: The effect of small silver inclusions on the palladium activity in formicacid oxidation reaction and corrosion stability

A PdAg deposit containing ~ 25 at.% Ag is obtained by the electrochemical codeposition from an aqueous solution of Pd and Ag sulfates (Au support, 0.5 M H₂SO₄). The deposit is characterized by means of various physical, physicochemical, and electrochemical methods. The PdAg deposit demonstrates the ~ 2 times higher specific activity (per the electrochemically active surface area (EASA) of Pd) in the formic acid oxidation reaction (FAOR) as compared with the individual Pd deposit prepared under the same conditions. The effect of silver additions on the palladium activity depends on many factors. The corrosion stability of PdAg is studied in 0.5 M H₂SO₄ solution based on the overall cyclic voltammograms (CVAs) and also on anodic and cathodic half-cycles in the region E = 0.3 − 1.25 V (vs. reversible hydrogen electrode (RHE)). The electrochemical estimates are compared with the results of direct analytical determination of dissolution products in solution after anodic polarization of deposits. The total amounts of Pd dissolved substantially increase with incorporation of Ag, which is associated, first of all, with the considerable increase in the EASA; at the same time, the specific dissolution of Pd also substantially increases. The possible factors determining the active dissolution of PdAg deposits are discussed; in particular, the specific mechanism of their dissolution via silver adatoms is proposed.

     

Exposing the Oxygen-Centered Radical Character of the Tetraoxido Ruthenium(VIII) Cation [RuO4]+

The tetraoxido ruthenium(VIII) radical cation, [RuO₄]⁺, should be a strong oxidizing agent, but has been difficult to produce and investigate so far. In our X-ray absorption spectroscopy study, in combination with quantum-chemical calculations, we show that [RuO₄]⁺, produced via oxidation of ruthenium cations by ozone in the gas phase, forms the oxygen-centered radical ground state. The oxygen-centered radical character of [RuO₄]⁺ is identified by the chemical shift at the ruthenium M₃ edge, indicative of ruthenium(VIII), and by the presence of a characteristic low-energy transition at the oxygen K edge, involving an oxygen-centered singly-occupied molecular orbital, which is suppressed when the oxygen-centered radical is quenched by hydrogenation of [RuO₄]⁺ to the closed-shell [RuO₄H]⁺ ion. Hydrogen-atom abstraction from methane is calculated to be only slightly less exothermic for [RuO₄]⁺ than for [OsO₄]⁺.     

ChemInform Abstract: Explaining Stability of Transition Metal Carbides — and Why TcC Does Not Exist.

The formation of transition metal (M) carbides M_xC_y and trends of their stability are systematically investigated using the USPEX code within the DFT.     

Mechanistic Insight into the Stereochemical Control of Lactide Polymerization by Salan–Aluminum Catalysts

Alkyl aluminum complexes of chiral salan ligands assembled around the 2,2′‐bipyrrolidine core form as single diastereomers that have identical configurations of the N donors. Active catalysts for the polymerization of lactide were formed upon the addition of benzyl alcohol. Polymeryl exchange between enantiomorphous aluminum species had a dramatic effect on the tacticity of the poly(lactic acid) (PLA) in the polymerization of racemic lactide (rac‐LA): The enantiomerically pure catalyst of the nonsubstituted salan ligand led to isotactic PLA, and the racemic catalyst exhibited lower stereocontrol. The enantiomerically pure catalyst of the chloro‐substituted salan ligand led to PLA with a slight tendency toward heterotacticity, whereas the racemic catalyst led to PLA of almost perfect heterotacticity following an insertion/auto‐inhibition/exchange mechanism.     

Locating Gases in Porous Materials: Cryogenic Loading of Fuel‐Related Gases Into a Sc‐based Metal–Organic Framework under Extreme Pressures

An alternative approach to loading metal organic frameworks with gas molecules at high (kbar) pressures is reported. The technique, which uses liquefied gases as pressure transmitting media within a diamond anvil cell along with a single‐crystal of a porous metal–organic framework, is demonstrated to have considerable advantages over other gas‐loading methods when investigating host–guest interactions. Specifically, loading the metal–organic framework Sc₂BDC₃ with liquefied CO₂ at 2 kbar reveals the presence of three adsorption sites, one previously unreported, and resolves previous inconsistencies between structural data and adsorption isotherms. A further study with supercritical CH₄ at 3–25 kbar demonstrates hyperfilling of the Sc₂BDC₃ and two high‐pressure displacive and reversible phase transitions are induced as the filled MOF adapts to reduce the volume of the system.